i have a 2003 Cavalier ls sport with the stock spoiler. I bought a new aftermarket one and i was wondering how do you tak the stock one off?
We Ride Together, We Die Together...... J-Bodies For Life!
SPONSORED BY: Showstopper Tuning, JM Graphics
2003 Cavalier LS Sport "SHOCKWAVE"
there should be 4 bolts on the bottom of the tunklid
ive always wanted to do this, does it leave holes in the trunk if u take off the z24 deck lid spoiler? i wanna get the pro wing, instead or go spoilerless
Obviously it's going to leave holes. It's bolted THROUGH the lid. If you want to go spoilerless or with a different spoiler that doesn't cover up those holes, then youre going to need to weld up where they where and repaint your deck (or have a body shop do it). It may also be more feesable to purchase a trunk lid without a spoiler on it. But you'd have to weigh your own options and costs.
but end the end the only dumb question is the one not asked...halfj and david are right....
(5) '95-'99 Z24 Rims
For those who are hoping to find this answer online without physically looking-
There are 8 bolts that hold the rear wing on an LS Sport Cavalier (atleast '00-'02 model). Mine is an '02. Take these out and unplug the 3rd brake light. I would imagine both older and newer models with various types of rear spoilers will have a similar configuration. And yes obviously if it's bolted there will be holes. LOL
There's actually 3 nuts and 4 bolts. The 3 nuts (silver) screw onto studs that are permanent to the spoiler. The 4 bolts (black) then bolt into the spoiler from the bottom.
There's one extra hole in the trunk lid for the 3rd brake light wire.
2002 Blue LS Sport Coupe 5-speed
My Paint Restoration Project --> http://www.j-body.org/forums/read.php?f=11&i=170933&t=170933